Xserve RAID |
| Configurations |
| Order
no. |
1TB Xserve RAID
M9721FE/A |
2.8TB Xserve RAID
MA208FE/A |
5.6TB Xserve RAID
MA209FE/A |
| Ultra ATA Apple Drive Modules (7200 rpm) |
Four 250GB drives |
Seven 500GB drives |
Fourteen 500GB drives |
| Controller cache |
512MB per controller |
| Total available storage-RAID 0 |
1TB |
3.5TB |
7TB |
| Usable storage-RAID 1 |
500GB |
1.5TB |
3TB |
| Usable storage-RAID 3 & 5 |
750GB |
3TB |
6TB |
| On-drive cache |
8MB per drive |
8MB per drive |
8MB per drive |
| Expansion |
Fourteen bays with independent 100MB/s ATA channels for up to 7TB of storage |
| Also included |
M5, M6 and 10/32-inch mounting screws; caged nuts; two agency-approved 12-foot power cables |
| Service and support |
90 days of free telephone support and one-year limited warranty, optional AppleCare Support plans are available. |
| |
| Specifications |
| RAID controllers and cache memory |
 |
Dual independent controllers, each with environment management coprocessor for out-of-band remote management and monitoring |
|
512MB of cache per controller (1GB total) |
|
Cache Backup Battery Modules (sold separately) for over 72 hours of memory protection |
|
| RAID operation |
|
Support for RAID levels: 0, 1, 3, 5, 0+1,10, 30, 50 (10, 30 and 50 require host-based software RAID) |
|
Support for multiple RAID sets, multiple hosts and LUN masking and mapping |
|
Background RAID set creation; automatic variable background rebuilding; online expansion; LUN slicing; global drive hot sparing (per RAID controller) |
|
| Fibre Channel storage-to-host connection |
|
Dual 2Gb Fibre Channel ports (SFP), 200MB/s throughput per channel with guaranteed delivery (400MB/s full duplex) |
|
Host connectivity using 2Gb Fibre Channel PCI-X Card (sold separately) or compatible third-party PCI card |
|
Support for point-to-point, loop and fabric (switched) topologies |
|
Dual 10/100BASE-T Ethernet for remote management |
|
| Apple Fibre Channel PCI-X Card (sold separately) |
|
64-bit, 133MHz card with two SFP 2Gb Fibre Channel ports; compatible with 32-bit, 66MHz PCI slots and 64-bit, 100 MHz or 133 MHz PCI-X slots |
|
Two 2.9-meter Fibre Channel copper cables with embedded SFP transceivers; compatible with SFP fiber-optic cables and tranceivers |
|
| Supported SFP Types |
Short-Haul Transceiver (supports up to 500m with 50/125 m MMF)
|
Finisar FTRJ-8519-P1BNL |
|
Pico Light PL-XPL-VE-S24-11 |
|
Pico Light PL-XPL-VC-S23-11 |
|
JDS Uniphase JSM-21S0AA1 |
|
JDS Uniphase JSP-21S0AA1 |
Long-Haul Transceiver (supports up to 10km with 9/125 m SMF)
|
Finisar FTRJ-1319-P1BTL |
|
| Cooling |
|
Redundant hot-swap cooling modules with self-regulating speeds and front-to-back cooling |
|
Environmental monitoring system for automatically maintaining optimal ambient temperature |
|
| Electrical requirements |
|
Redundant load-sharing hot-swap power supplies (450W); universal input (100V to 240V AC), power factor corrected |
|
Maximum input current: 7.6A (100V to 127V) or 3.6A (200V to 240V) |
|
Power usage: 300W typical continuous power, 400W maximum continuous power |
|
Dual DB-9 serial ports for UPS systems |
|
Frequency: 50Hz to 60Hz, single phase |
|
| Environmental requirements |
|
Operating temperature: 50° to 95° F (10° to 35° C) |
|
Storage temperature: -40° to 116° F ( -40° to 47° C) |
|
Relative humidity: 5% to 95% noncondensing |
|
Maximum thermal output: 1365 BTUs per hour |
|
Maximum altitude: 10,000 feet |
|
FCC Class A approved |
|
| Size and weight |
|
3U rack-optimized: 5.25 inches (13.3 cm) high by 17 inches (43.2 cm) wide by 18.4 inches (46.7 cm) deep |
|
its EIA-310-D-compliant industry-standard 19-inch-wide four-post racks from 24 to 36 inches deep; deeper racks require third-party extender |
|
60-100 pounds (27-45 kg), depending on configuration |
|
| Price |
RM 31,199.00 |
RM 42,999.00 |
RM 63,699.00 |
| |
|
( Close ) |
